Connecting Peripherals

You can connect a monitor that you supply and the mouse and keyboard supplied by Stratus.

Note: Other keyboards and mice have not been tested and may not work properly.

For information about monitor and keyboard requirements, see Site Planning for Peripheral Components.

To connect a mouse, keyboard, and generic monitor

  1. Connect the USB cables from the mouse and keyboard to USB ports on a compute module (see Figure 20).

    Note: Do not connect the mouse or keyboard to the USB 2.0 port on the control-panel earClosed A module located at the front right of the ztC Endurance system. It houses a USB 2.0 port, power button for the ztC Endurance system, and LEDs that indicate system power status (PWR), fault conditions (ATTN), and module identification status (UID)..

  2. Connect the 15-pin D-sub connector on the VGA cable from the monitor to the system’s VGA port on a compute module (see Figure 20).

  3. Connect the VGA cable to the monitor.

Related Topics