Changing Passwords on a ztC Endurance System

After installation, use the Change Passwords page on the ztC Endurance console​ to change the following user-configurable passwords:

  • BMCs - AdminBMC Web console administrator account password.

  • BMCs - Sysadmin — Password for the Debug console sysadmin user account. This is automatically set by the ztC Endurance system during initial installation, but you can change it. Most users never need to access the BMC Debug console.

  • Redfish — Password for the BMC Redfish administrator account. This is automatically set by the ztC Endurance system during initial installation, but you can change it. Most users never need to access the Redfish administrator account.

  • Management Userzenadmin account on the Standby OS.

See Gathering Information to learn more about the BMC Web console administrator account password and the zenadmin password.

Note: Changing a password requires placing the standby compute module in maintenance mode, and changing the Management User password requires a Smart Exchange. The system prompts you to confirm these actions before proceeding.

Use the ztC Endurance console​ to change the passwords for accounts on the ztC Endurance system.

To change passwords 

  1. Log in to the ztC Endurance console​ as described in Logging In to the ztC Endurance Console.

  2. Under Administrative Tools, click Change Passwords.

  3. On the Change Passwords page, select the radio button for the password you want to change: BMCs - Admin, BMCs - Sysadmin, Redfish, or Management User.

  4. If the Old Password field is present, enter the existing password.

  5. In the New Password field, enter the new password.

  6. In the Confirm New Password field, enter the new password again.

  7. Click Save to save your changes, or click Cancel to cancel the change-password operation.