Configuring Internet Proxy Settings

Configure proxy settings for the ztC Endurance system if your organization requires a proxy server to access the Internet and you have a service agreement with Stratus or another authorized ztC Endurance service representative.

A proxy server provides a secure bridge between the ztC Endurance system and the Internet. Automated Uptime Layer with Smart Exchange software uses proxy server information for only outbound HTTP traffic related to support notification messaging and remote support access features.

To configure Internet proxy settings

1. In the left-hand navigation panel, click Proxy Configuration under Remote Support.
2. On the Proxy Configuration page, click the Enable Proxy box to enable proxy service.
3. For Scheme, select either https or http.
4. In the Proxy Server box, type the fully-qualified proxy server host name or IP address.
5. In the Port Number box, type the port number if it is different from the default number (3128).

6. If the proxy server requires authentication, click the Enable Authentication box and type the Username and Password.

   If you do not type a password, the previous password continues to be required. If the previous password was empty and you do not enter a new password, the password remains empty.

7. Click Save (or click Cancel to restore the previously saved values).