Power Cords

Stratus supplies tested and approved AC power cords for the ztC Endurance system and for Stratus-supplied peripheral components.

Caution: Place all power cords out of the way of foot traffic.
Précaution: Éloigner tous les cordons d'alimentation du passage.

Power cords described as "Domestic" are made with American Wire Gauge (AWG) cordage and are intended for use in North America. Refer to UL 62 and CSA C22.2, No. 49. All other power cords are made with international cordage and are intended for use in the specified countries, and in other countries that use that standard.

Table 7 lists the available high-voltage power cords that connect ztC Endurance 3100, 5100, and 7100 systems directly to an AC power source (not to a PDU or to a UPS).

Table 7: Power Cords: ztC Endurance Systems to AC Power
Marketing ID

Plug Type

Rating Length Locale
ZEN-PWR-211 IEC 60320 C19 to CEE 7 VII 16A/250V 8.2 ft (2.5m) Europe, Korea
ZEN-PWR-212 IEC 60320 C19 to IEC/EN 60309 16A/250V 8.2 ft (2.5m) United Kingdom
ZEN-PWR-213 IEC 60320 C19 to SAA/3/15 15A/250V 8.2 ft (2.5m)

Australia
ZEN-PWR-214 IEC 60320 C19 to SABS164- 1:1992 ZA/3 16A/250V 8.2 ft (2.5m) India
ZEN-PWR-215 IEC 60320 C19 to JIS C8303 6/15AJ 15A/250V 8.2 ft (2.5m) Japan, Taiwan
ZEN-PWR-216 IEC 60320 C19 to GB2099/GB1002 16A/250V 8.2 ft (2.5m) China
ZEN-PWR-217 IEC 60320 C19 to NBR14136 16A/250V 8.2 ft (2.5m) Brazil
ZEN-PWR-218 IEC 60320 C19 to CNS 690 20A/250V 8.2 ft (2.5m) Taiwan
ZEN-PWR-221 IEC 60320 C19 to NEMA 6-20 20A/250V 8.2 ft (2.5m) United States

Table 8 lists the available low-voltage power cords that connect ztC Endurance 3100 systems directly to an AC power source (not to a PDU or to a UPS).

Table 8: Low-Voltage Power Cords: ztC Endurance 3100 Systems to AC Power
Marketing ID

Plug Type

Rating Length Locale
ZEN-PWR-219 IEC 60320 C19 to NEMA 5-15 15A/125V 8.2 ft (2.5m) United States
ZEN-PWR-220 IEC 60320 C19 to 498GJTW 15A/125V 8.2 ft (2.5m) Japan and Taiwan
ZEN-PWR-222 IEC 60320 C19 to NEMA 5-20 20A/125V 8.2 ft (2.5m) United States
Note: When ordering individual power cords as spares or upgrades, the product's Marketing ID should be followed by -P.

Related Topics